"A" Group: Standard Functions
A input select
B input select
Func.
Code
Analog Input Calculate Function - The inverter can mathematically combine
two input sources into one value. The Calculate function can either add, sub-
tract, or multiply the two selected sources. This provides the flexibility needed
by various applications. You can use the result for the output frequency setting
(use =) or for the PID Process Variable (PV) input (use =).
Digital operator
Remote operator POT
[O] input
[OI] input
Network variable
Digital operator
Remote operator POT
[O] input
[OI] input
Network variable
"A" Function
Name
Operation frequency input A
setting
Operation frequency input B
setting
Operator selection
Add Frequency - The inverter can add or subtract on offset value to the out-
put frequency setting which is specified by (will work with any of the five
possible sources). The ADD Frequency is a value you can store in parameter
. the ADD Frequency is summed with or subtracted from the output fre-
quency setting only when the [ADD] terminal is ON. Function selects
whether to add or subtract. By configuring an intelligent input as the [ADD] ter-
minal, your application can selectively apply the fixed value in to offset
(positively or negatively) the inverter output frequency in real time.
A141
A
B
A142
Description
...Operator (Digital Operator
(F001))
...VR (Digital Operator (FREQ
adjuster))
...O (Input O)
...OI (Input OI)
...Modbus (RS485)
...Option 1
...Option 2
...Pulse (Pulse train frequency)
Calculates a value based on the A
input source ( selects) and B
input source ( selects). Three
options:
... ADD (Addition (A + B))
... SUB (Substraction (A - B))
... MUL (Multiplication (A x B))
Section 3-5
A143
"CAL"
• A + B
(result)
• A - B
• A * B
Run
Defaults
Mode
EU
Units
Edit
–
–
–
119