Ce-Emc Installation Guidelines; Important Notes; Condition For The Compliance; Applicable Emc Filter - Omron 3G3MX2 User Manual

Mx2 series 200 v class three-phase input 0.1 to 15 kw 200 v class single-phase input 0.1 to 2.2 kw 400 v class three-phase input 0.4 to 15 kw
Hide thumbs Also See for 3G3MX2:
Table of Contents

Advertisement

D-1

CE-EMC Installation Guidelines

D-1-1

Important notes

CE-EMC Installation Guidelines
You are required to satisfy the EMC directive (2004/108/EC) when using an
MX2 inverter in an EU country.
To satisfy the EMC directive and to comply with standard, you need to use a
dedicated EMC filter suitable for each model, and follow the guidelines in this
section. Following table shows the compliance condition for reference.
Table 1: Condition for the compliance
Model
1-ph. 200V class
3-ph. 400V class
3-ph. 200V class
Table 2: Applicable EMC filter
Input class
1-ph. 200V class
3-ph. 200V class
3-ph. 400V class
1. Input choke or other equipment is required if necessary to comply with
EMC directive from the harmonic distortion point of view (IEC 61000-3-2
and 4).
2. If the motor cable length exceeds 25 m, use output choke to avoid unex-
pected problem due to the leakage current from the motor cable (such as
malfunction of the thermal relay, vibration of the motor, etc.).
3. As user you must ensure that the HF (high frequency) impedance between
adjustable frequency inverter, filter, and ground is as small as possible.
• Ensure that the connections are metallic and have the largest possible
contact areas (zinc-plated mounting plates).
4. Avoid conductor loops that act like antennas, especially loops that encom-
pass large areas.
• Avoid unnecessary conductor loops.
• Avoid parallel arrangement of low-level signal wiring and power-carrying
or noise-prone conductors.
Cat.
Carrier f
C1
15 kHz
C2
15 kHz
C1
15 kHz
C2
15 kHz
Inverter model
AB001 / AB002 / AB004
AB007
AB015 / AB022
A2001 / A2002 /
A2004 / A2007
A2015 / A2022
A2037
A2055 / A2075
A2110
A2150
A4004 / A4007
A4015 / A4022 / A4030
A4040
A4055 / A4075
A4110 / A4150
Appendix D
Motor cable
25 m (Shielded)
100 m (Shielded)
25 m (Shielded)
50 m (Shielded)
Filter model RASMI
AX-FIM1010-RE (10A)
AX-FIM1014-RE (14A)
AX-FIM1024-RE (24A)
AX-FIM2010-RE (10A)
AX-FIM2020-RE (20A)
AX-FIM2030-RE (30A)
AX-FIM2060-RE (60A)
AX-FIM2080-RE (80A)
AX-FIM2100-RE (100A)
AX-FIM3005-RE (5A)
AX-FIM3010-RE (10A)
AX-FIM3014-RE (14A)
AX-FIM3030-RE (23A)
AX-FIM3050-RE (50A)
373

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents