Priority Transmission Of A Stored Job - Sharp MX-M350U Operation Manual

PRIORITY TRANSMISSION OF A STORED JOB

If you have an urgent transmission job and multiple transmission jobs have already been stored, you can give priority
to the urgent job so that it will be transmitted immediately after the job currently being executed. This is done from the
job status screen. For details on using the job status screen, refer to page 1-15 of the operation manual (for general
information and copier operation).
1 Press the [JOB STATUS] key.
COPY
SYSTEM
JOB STATUS SETTINGS
2 Touch the mode key ([SCAN TO] or
[INTERNET-FAX]).
PAGES STATUS
COPYING
020 / 001 1/1
020 / 000 WAITING
020 / 000 WAITING
WAITING
002 / 000
STOP
FAX JOB
SCAN TO INTE
CO
D
PR
3 Touch the key of the job to which you wish
to give priority.
The touched key is highlighted.
4 Touch the [PRIORITY] key.
STATUS
PAGES
20 / 001
SENDING
1/1
20 / 000 WAITING
20 / 000
WAITING
WAITING
2 / 000
SCAN TO
FAX JOB
NOTE
If the job in progress is a broadcast transmission job, the
priority job will temporarily interrupt the job after the
transmission currently in progress is finished. When the
priority job is finished, the broadcast transmission will
resume. However, if the priority job is also a broadcast
transmission, the job is begun after the current
broadcast job is completed.
3-12
The selected job moves
JOB QUEUE
up to the next position
COMPLETE
after the job currently
DETAIL
being executed.
PRIORITY
When the current job is
STOP/DELETE
completed, execution
INTERNET-FAX
begins of the
selected in step 3.
job