Enlargement Transmission - Sharp MX-M350U Operation Manual

SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION AND FILE FORMAT)
Enter the X (width) and Y (length) dimensions
6
of the original with the
X
CANCEL OK
A
Y
(64 432)
X 420
mm
(64 297)
Y 297
mm
RECALL STORE/DELETE
length of 64 to 297 mm (2-1/2" to 11-5/8") can be
entered in Y.
7 Touch the outer [OK] key.
The original size entered in step 6 is stored in the
key selected in step 5.
To exit, touch the [ORIGINAL] key.
8 When you touch a key that shows an
original size in step 5, a message screen
appears that contains the keys [CANCEL],
[DELETE], and [AMEND].
●To cancel the procedure, touch the [CANCEL]
key.
●To delete the selected original size, touch the
[DELETE] key.
●To change the original size stored in the key,
touch the [AMEND] key. The screen of step 6
will appear to let you change the size.

ENLARGEMENT TRANSMISSION

If the original size for scanning is not a long size or a non-standard size, you can enlarge a transmission by specifying
the size that is to be sent.
1 Touch the [ORIGINAL] key.
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO A4
ORIGINAL
2 Touch the [SEND SIZE] key.
OK
SEND SIZE
100%
AUTO
2-SIDED
TABLET
3 Touch the desired send size key.
A5 A4
A5R A4R
B5 B4
B5R
A3
keys.
X (width) is initially
selected.
Enter X and then touch
the ( ) key to enter Y.
A width of 64 to 432 mm
(2-1/2" to 17") can be
entered in X, and a
The sizes that can be
selected as the send
size are displayed.
If you wish to select an
inch size, touch the
[INCH] key and then
touch the desired send
size key.
2-17
To exit, touch the [ORIGINAL] key.
9
■ Using a stored original size
1 Follow steps 1 to 3 of "STORING OR
DELETING AN ORIGINAL SIZE".
Touch the original size key that you wish
2
to use.
X68 Y78
RECALL STORE/DELETE
3 Touch the [OK] key.
The stored original size is called up.
4 Touch the [OK] key.
OK
A4
AB
A4R
INCH
B4
A3
Touch the [OK] key.
5
OK
SIZE
A3
The specified size is
displayed as the send
size.
You will return to the
initial screen.