Base Screen - Sharp MX-M350U Operation Manual

BASE SCREEN

Scan mode and Internet fax mode are used by selecting functions and settings in the base screens of those modes.
To display the base screen of a mode, touch the [IMAGE SEND] key in the touch panel and then select the desired
mode with the [MODE SWITCH] key.
The explanations in this manual assume that the base screen of scan mode initially appears when the [IMAGE
SEND] is pressed. The explanations begin from this screen.
If you have set the display to show the address book screen
touch the [CONDITION SETTINGS] key in the address book to display the condition setting screen.
The administrator setting "Default display settings" (refer to
the condition setting screen (shown below) or the Address book screen
key is pressed.
NOTE
For information on the parts of the unit and the operation panel that are used for network scanning, refer to pages
1-9 to 1-13 of the operation manual (for general information and copier operation). For parts that are used for both
network scanning and printing, refer to chapter 6 of operation manual (for printer).
■ Condition settings screen
Base screen of scan mode
READY TO SEND
.
AUTO
EXPOSURE
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO
ORIGINAL
Message display
Messages appear here to indicate the current
status of the machine.
When the machine is ready to send, an icon
appears to the left.
[ ] (Quick) key (page
When you add a one-touch key or a group key, the
machine will automatically assign a shortened
number (in this manual, this key is called the Quick
key). Use this key for a three-digit shortened
number to simplify the transmission procedure.
[MODE SWITCH] key
Touch this to change the image send mode.
The modes that can be selected will vary
depending on the peripheral devices (network
scanner expansion kit, facsimile expansion kit,
Internet fax expansion kit) that are installed.
When the application integration module is
installed, the [DATA ENTRY] key appears below the
[MODE SWITCH] key. For information on sending
metadata in data entry mode, see "METADATA
DELIVERY" (page 5-1).
[RESEND] key
Touch this key to resend to the last Scan to E-mail,
Internet fax, or fax destination used.
Note that the following types of destinations are not
retained for the resend function.
RESEND
SCAN
ADDRESS BOOK
MODE SWITCH
ADDRESS REVIEW
SPECIAL MODES
ADDRESS ENTRY FILE
SEND SETTINGS QUICK FILE
2-12)
1-11
(following page) when the [IMAGE SEND] key is pressed,
page 8-4) can be used to set the display to show either
(following page) when the [IMAGE SEND]
Base screen of Internet fax mode
READY TO SEND
.
AUTO
EXPOSURE
STANDARD
RESOLUTION
AUTO
ORIGINAL
● A one-touch key in which multiple destinations
are stored (group key).
● Scan to FTP, Scan to Desktop, and Scan to
Network Folder addresses.
● Broadcasting addresses
● Addresses used only for BCC delivery
After the resend address is entered, the key
changes to the [NEXT ADDRESS] key.
[ADDRESS BOOK] key
This displays the Address Book screen
page). Touch this key when you wish to use a one-
touch key that has a destination (or group)
programmed in it.
[ADDRESS REVIEW] key
When performing a broadcast transmission, touch
this key to check your selected destinations. Your
selected destinations will appear as a list, and the
list can be edited.
[SPECIAL MODES] key
Touch this key to set the special modes.
● Program
(page 3-3)
● Erase
(page 3-4)
● Dual page scan
(page
● Timer
(page 3-6)
● 2 in 1
(page 3-7)
● Card shot
(page 3-8)
● Job build
(page 3-10)
● Transaction report
RESEND
INTERNET-FAX
ADDRESS BOOK
MODE SWITCH
ADDRESS REVIEW
SPECIAL MODES
ADDRESS ENTRY FILE
QUICK FILE
SEND SETTINGS
(next
(page 2-13)
3-5)
(page 3-11)