Operation; Front Panel Features - Extron electronics DXP DVI Pro Setup Manual

Operation

This section describes the DXP front panel controls and the
procedures to configure and begin to operate the DXP switchers.
For additional operations and more details, see the DXP DVI Pro and
DXP HDMI Series User Guide, available from the provided Extron
software disc or from the Extron website at www.extron.com. Topics
include:

Front Panel Features

•
Operations
•
Front Panel Features
The front panels of all DXP models have the same controls and layout
(shown below). The front panel buttons are grouped into two sets,
with the input and output buttons located on the left side of the
control panel and the control buttons on the right side.
These illuminated push buttons can be labeled with text or graphics.
You can set the buttons to have amber background illumination
all the time, or you can disable the illumination (see "Setting
the Background Illumination" in the "Operation" section of the
DXP DVI Pro and DXP HDMI Series User Guide for the procedure).
The front panel buttons have multiple functions. The primary
functions are listed in this section. For details on the primary and
secondary button functions, see the DXP user guide.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
OUTPUTS
Figure 10.
a
Input buttons — The input buttons have two primary functions:
•
•
b
Output buttons — The output buttons have two primary
functions:
•
•
1
INPUTS
2
DXP Switchers Front Panel
Select an input.
Identify the selected input.
Select outputs.
Identify the selected outputs.
DXP DVI Pro and DXP HDMI Series • Operation
CONTROL I/O
VIEW ESC
ENTER PRESET VIDEO
CONFIG
DXP SERIES
DIGITAL MATRIX SWITCHER
7 8 9
3 4 5 6
AUDIO
13