Extron electronics DXP DVI Pro Setup Manual page 38

Command Function
Reset
System reset to factory defaults
NOTE: This command excludes IP settings such as IP address, subnet mask, and gateway address. It does not remove the file system.
Absolute system reset
NOTE: This command includes resetting the IP address to 192.168.254.254 and the subnet mask to 255.255.0.0. The firmware version
remains the same.
ASCII Command Response
(Host to Switcher) (Switcher to Host)
E }
ZXXX Zpx
E }
ZQQQ Zpq
Additional Description
]
Clear all ties and presets and reset unit to
factory default settings.
]
Clear all ties and presets and reset unit to
factory default settings.