Command And Response Table For Sis Commands - Extron electronics DXP DVI Pro Setup Manual

Command and Response Table for SIS Commands

NOTE:
The following table is a partial list of SIS commands. For a complete listing, see the DXP DVI Pro and DXP HDMI Series User
Guide, "SIS Configuration and Control" section.
Command Function
Output Switching
NOTES: Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*8$ .
• The matrix switchers support 1-, 2-, and 3-digit numeric entries ( 1*1!, 02*02& , or 003*003% ).
The & tie (output switching) command for RGB and the % tie command for video can be used interchangeably.
•
The & view ties command for RGB and the % view ties command for video can be used interchangeably.
•
X@ X#
Tie input to output , video and
audio
Example
X@ X#
Tie input to output , RGB only
Example
(See second note, above.)
X@ X#
Tie input to output , video only
Example
(See second note, above.)
X@ X#
Tie input to output , audio only
Example:
X@
NOTE: = Input number
X#
= Output number
ASCII Command
(Host to Switcher)
X@ X#
* !
1*3!
X@ X#
* &
8*4&
X@ X#
* %
7*5%
X@ X#
* $
6*4$
0 – maximum number of inputs for your model ( 0 = untied)
1 – maximum number of outputs for your model
Response
Additional Description
(Switcher to Host)
X# X@ ]
• •
Out In All Tie video and audio of input
X#
.
]
• • Tie input 1 video and audio to output 3.
Out3 In1 All
X# X@ ]
Video breakaway
• •
Out In RGB
]
• • Tie input 8 RGB to output 4.
Out4 In8 RGB
X# X@ ]
Video breakaway
• •
Out In Vid
]
Tie input 7 video to output 5.
• •
Out5 In7 Vid
X# X@ ]
Audio breakaway
• •
Out In Aud
]
Tie input 6 audio to output 4.
•
Out4 • In6 Aud
X@
to output