Extron electronics DXP DVI Pro Setup Manual page 34

Command Function
Save and Recall Presets
NOTE: If you try to recall a preset that is not saved, the matrix switcher responds with the error code E11 .
Save current configuration as a global
preset
Example:
Recall a global preset
Example:
Front Panel Lock (Executive) Modes
NOTE: See "Locking and Unlocking the Front Panel (Executive
Lock all front panel functions
Lock advanced front panel functions
Unlock all front panel functions
View lock status (executive mode)
EDID (Extended Display Identification Data) Commands
Assign EDID data to an input
Assign EDID data to all inputs
X!
NOTE: = Input number
X$
= Current front panel lock mode 0 = unlocked
X&
= Global preset number
X1(
= EDID file reference number
ASCII Command Response
(Host to Switcher) (Switcher to Host)
X&
, Spr
9,
Spr09
X&
. Rpr
5.
Rpr05
Modes)" in the "Operation" section for more on the lock modes.
1X
Exe1
2X
Exe2
0X
Exe0
X$]
X
E X! X1( }
A * EDID EdidA
E X1( }
A *EDID EdidA00*
1 – maximum number of inputs for your model
1 = all front panel functions locked
01 – 32
01 – 40 ( 32 = default 720p @ 60 Hz)
Additional Description
X&]
Save global preset
Command character is a comma.
]
Save current set of ties as preset 9.
X&]
Command character is a period.
]
Recall preset 5, which becomes the current
configuration.
]
Enable lock mode 1 .
]
Enable lock mode 2 .
]
Enable lock mode 0 .
Display current lock mode
X! X1(]
* Assign EDID file
X1(]
Assign EDID information files to all inputs.
See the
for a list of values contained in each EDID
file.
X&
.
X$
.
X1( X!
to input .
EDID Reference Table on page 24
2 = basic functions unlocked