Starting The Program - Extron electronics DXP DVI Pro Setup Manual

3. Scroll to the Matrix Switchers Control Program and click Install .
Figure 21.
4. Follow the on-screen instructions. The installation program creates
a C:\Program Files\Extron\Matrix_Switchers directory and
an "Extron Electronics\Matrix Switchers" group folder. It installs
the following four programs:
•
•
•
•

Starting the Program

1.
To run the Matrix Switcher program, click Start >
All Programs > Extron Electronics > Matrix Switchers >
MATRIX Switcher + Control Pgm . The Comm Port Selection
window appears.
Figure 22.
2. Select the Comm (serial) port that is connected to the switcher or
select IP [LAN] .
3. If you selected a Comm port, check the baud rate (shown in green
above the ports list). If you need to change it, click the Baud
button and double-click the desired baud rate option on the
drop-down menu that opens.
34 DXP DVI Pro and DXP HDMI Series • Remote Control
Matrix Switchers Control Program Install Link
MATRIX Switcher + Control Program
MATRIX Switcher + Help
Uninstall MATRIX Switcher
Check for Matrix Updates
Comm Port Selection Screen