Strong SRT 8526 User Manual page 18

PART 2 • English
6.3.3 osD setting
OSD Transparency:
Banner time-out:
6.3.4 Time setting
This menu allows you to specify the method which the receiver will use to synchronise the date and
time and you can set the duration for displaying the information banner.
Time Offset:
Region:
Time Zone:
Summer Time:
6.3.5 Auto standby
Auto standby is a new feature that helps you reduce power consumption. When Activation is set to
On, the receiver will switch to standby if it hasn't received any commands for three hours. Set Auto
Standby to Off to deactivate this function. When the setting is On you can adjust the Duration Before
Standby: Available settings are: 1 Hour - 12 Hours with steps of one hour.
6.3.6 Parental Control
After selecting this menu item and pressing ok you will be asked to enter the PIN code (DEfAUlT
PIn: 0000). This menu allows you to use the EPG based parental rating system if supported by the
local broadcast.
Age:
Example: Your youngest child is 7 years old and you have set a rate of 07. Now when you switch
to a channel which is not foreseen for an age below 10 years you will have to enter the PIN code
(DEfAUlT PIn: 0000).
6.3.7 Reset factory Default
This option allows you to reset the receiver to the factory settings, which clears all stored channels
and settings.
WARnIng:
After selecting this menu and pressing ok you will be asked to enter the PIN code (DEfAUlT PIn:
0000). After having entered the PIN code you will be guided to the Installation Guide again!
If necessary, you can change the PIN code. To change the PIN code, please enter the Tools menu, see
chapter 6.4.3 of this manual.
Use tu to adjust the level of menu transparency. It is possible to
adjust your setting in 10% steps, the setting of 0% will configure
the menu to be opaque and adjusting 100% will configure the
menu to be absolutely transparent.
Use tu to choose between the available settings: 3s, 4s, 5s, 6s, 7s,
8s, 9s and 10s.
Use tu to choose Auto to synchronise time and time zone
automatically, or Manual to specify the time zone manually.
Use tu to choose your specific country.
This setting is only available when the Time Offset is set to
Manual. You can use tu to adjust the time zone, if the automatic
settings in your region are not supported by the broadcast.
Use tu to select On or Off according to your local season.
Use tu to change the settings. Following rates are available: OFF
(to disable the function), 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16,
17 and 18. Whenever switching through channels which submit EPG
based parental rate and the rate of the current broadcast is below
the adjusted rate, you will have to enter your PIN code.
By resetting your receiver to the factory default, all your settings and
stored channels will be permanently deleted. Please use this option with
care!
15