Playback Of Recording; Main Menu; Programme Organizer - Strong SRT 8526 User Manual

PART 2 • English

5.9 Playback of recording

If recordings were already made you have the possibility to access the HDD Manager directly from
viewing mode by pressing the u button. With pq select the record of your choice and with
ok start the playback in preview mode. To watch a record in full screen mode press ok again.
Alternatively you can press u to start playback in preview mode. Further options are displayed in
the Records menu. For a detailed description of the menu please refer to chapter 6.5 Records.
WARnIng:

6.0 mAIn mEnU

The main menu gives you access to specific settings and multimedia functions. To access the main
menu, press mEnU in viewing mode. The main menu consists of the following sub menus: Program
Organizer, Channel Search, System Setup, Tools, Records, Multimedia and Irdeto CA Status.
Press ExIT in the main menu to get back to the previous menu.

6.1 Programme organizer

Press mEnU and use tu to select the Program Organizer and press ok.
Following submenus are displayed: Channel Manager, Channel Sort and Delete all.
Use pq to select a submenu and press ok or u to access.
6.1.1 Channel manager
The channel manager allows you to move, skip, lock, delete and add channels to the favourite list.
To access this menu you will need to enter your PIN code (DEfAUlT PIn: 0000).
Now your TV channel list will be shown. To switch between the TV and radio list use tu. To
navigate within the list, use the pq buttons.
Move
Skip
Lock
Within Irdeto encrypted services some events may be protected and fast
forward/rewind will be limited or might not be possible. If maturity rating
is activated for a specific recording, you need to enter your PIN Code
MATURITY Rating PIN: 0000 before playback can be started.
To move a channel to a new position, use the pq buttons to
select the channel, then press the RED button. Now next to the
channel's name the symbol
channel can be moved to another position. To do so, use the pq
buttons to move it and press ok to confirm. Proceed as described
for any other channels you wish to move. You can also correct the
channel selection for moving by pressing the RED button again.
To skip a channel during switching through the channel list, use
the pq buttons to select the channel, then press the gREEn
button. Now next to the channel's name the symbol
After that, channels marked with
switching through the channels in viewing mode. Proceed as
described for any other channels you wish to skip. You can also
correct the channel selection by pressing the gREEn button
again. Channels marked for skipping will stay accessible within
the channel list.
To lock a channel of the channel list, use the pq buttons to
select the channel, then press the YElloW button. Now next to
the channel's name the symbol

marked with
when switching to it. Proceed as described for any other channels
you wish to lock. You can also correct the channel lock by
pressing the YElloW button again.
is shown. This indicates that this
will be ignored when

is shown. After that, channels
will request the PIN code (DEfAUlT PIn: 0000)
is shown.
11