Channel Search - Strong SRT 8526 User Manual

Delete
Add channels to favourite lists
6.1.2 Channel sort
This menu allows you to sort the channels by following methods:
By LCN:
By Service Name:
By Frequency:
By Operator:
6.1.3 Delete All
Use this menu carefully! It will delete all of the stored channels and settings! To execute this function
it will be requested to enter the PIN code (DEfAUlT PIn: 0000). After you have performed this
action you will be guided to the Installation Guide again!
WARnIng:

6.2 Channel search

In the menu Channel Search you can adjust your search settings and perform an automatic
or manual channel search. Press mEnU and use tu to select Channel Search, then press ok.
Following submenus will be displayed: Search Setup, Auto Search and Manual Search.
Use pq to select a submenu and press ok or u to access.
12
To delete a channel, use the pq buttons to select the channel
then press the blUE button. Now you will be asked if you want
to delete this channel. Press ok to confirm or ExIT to cancel. The
channel(s) you delete from the channel list will be permanently
removed, also if this channel is part of the favourite list.
To add a channel to a favourite group, use the pq buttons to select
the channel then press the fAv button. Now the favourite group
selection will be shown. Select the group to which the channel
should be added with pq and press ok. The selected channel
will be marked with the symbol v. Additionally you can also select
another favourite group where to add this channel. To do so, press
ok at the this group. When you have added the channel to the
group(s), press ExIT to go back to the channel list. There you can
proceed in the same way to add other channels to favourite groups.
You can also remove a channel from a favourite group by
pressing the fAv button again and selecting the group it is part
of. Then press ok to remove the symbol and the channel will be
removed from this (these) favourite group(s).
The channels will be sorted according to the LCN (Logical
Channel Numbering) system, which may be broadcasted in your
area. If the operator does not support LCN your channel numbers
will start with channel number 800, otherwise the LCN channels
will be sorted in regional order starting with 1. None LCN
channels can be found again starting with number 800. Further,
the LCN method will allow you to save the strongest channels
broadcasted in your area, only.
The channels will be sorted in alphabetical order.
The channels will be sorted in ascending order of the frequency
in which they are broadcasted.
The channels will be sorted by the operator ID.
The Delete all function will permanently delete all of the stored channels
and settings from your receiver!
PART 2 • English