Table of Contents
Advertisement
The next option Modulation is to select between Only DVB-T or DVB-T+T2 modulation type.
When in doubt, use the DVB-T+T2 setting.
If you use an active antenna (with built-in amplifier), then switch the Antenna Power to On. If you use a
passive antenna (without built-in amplifier), then select Off.
Highlight Search and press OK to start scanning. New found channels will be added to the channel
list.
7.1.2 Auto Search
This menu allows you to search for channels from all available frequencies for your selected region
automatically. Be aware that all previous installed channels and favourite list(s) will be deleted. The
new found channels will be installed in the channel list and afterwards you can create a new favourite
list if you like.
Select Scan mode, and select between Free which will only install Free-to-Air channels or All. Highlight
Search and press OK to start scanning.
7.1.3 Information
This submenu shows receiver specific information such as hardware and software version. It also
displays technical information from the currently selected channel and signal strength and quality.
Please have the Information screen on hand when you call our hotline. The person who answers your
call might ask for the information given in this screen.
7.1.4 Factory Reset
This option allows you to reset the receiver back to the factory settings, which also clears all stored
channels.
Use pq to select Load Factory Settings in the Installation menu and press OK. You are asked to
enter your PIN code. Enter the correct PIN code using the 0~9 buttons. (DEFAULT PIN: 1234). A
confirmation window is displayed. Select OK to load factory settings. Select Cancel to cancel. Press
to leave.
WARNING:
7.2 Channel Editing and Programme information
Use t u to select Channels in the main menu.
Use pq to highlight the submenu of choice and press OK to select.
7.2.1 TV Manager
This menu allows you to create favourite lists, move channels in order, lock channels with PIN
protection and delete channels from the TV list.
7.2.1.1 Adding channels to favourite lists
Channels from the TV list can be added to up to 4 different favourite groups. Select Favourite and
press OK, select the wanted favourite group and press OK. Use pq to select a channel you wish to
By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.
13
Advertisement
Table of Contents
