Channel Search Settings; Power Settings; Miscellaneous Settings; Restore Factory Settings - Strong SRT 5800 User Manual

6.3.5 Menu Transitions
Select the speed of the menu transitions between smooth, medium and fast.
6.3.6 Menu Background Effect
Here you can select between 6 different background effects.

6.4 Channel Search Settings

See chapter 7

6.5 Power Settings

Here you can select the time after which the box automatically switches into Standby. Default set to Off.

6.6 Miscellaneous Settings

6.6.1 Time Zone Adjustment
Select whether you want to have local time set to Greenwich time automatically or if you want to specify it manual.
6.6.2 Time Zone
Select the entry GMT +01:00 for Germany and Central Europe (plus 1 hour difference to Greenwich time).
6.6.3 Summer time
Set "Summer time" to Off or On depending on the current season. If you selected the setting "Automatic" in Time Zone
Adjustment above, then receiver obtains the information regarding summer time from the current selected channel
automatically.
6.6.4 Audio Format
To select audio output between Stereo and different Mono options.
6.6.5 Dolby Digital Automatic
Enable/Disable automatic detection of Dolby Digital audio channels.
Only enable this option when you have connected a Dolby Digital supported system.

6.7 Restore Factory Settings

You can reset the receiver to default settings.
Note: The defined settings and CH lists will be deleted.
1. Press MENU to open the main menu.
2. Highlight Box settings by using
3. Highlight Restore factory settings and press OK.
4. Set Yes by using
The receiver will reboot. It switches off and shortly afterwards switches on again and will start with First installation, see
chapter 4.

7.0 SEARCH FOR CHANNELS

In the Search for Channels menu you can choose between Automatic search and Manual search. If you are using an
Active Antenna you can select it to ON in Antenna Settings in order to get stronger signal.
After the first installation, see chapter 4, if you want to search again for channels, or to add specific channels that are
additionally broadcasted.
Channel search settings
Highlight the Channel search settings and press OK. Specify whether the channel list is to be automatically updated
(Automatic) or not (Off).
Automatic search
This scan mode is recommended due to its feature of automatically finding all receivable channels.
1. Highlight Automatic search and press OK.
2. Press OK to start automatic scanning.
8
pq
and press OK.
u
and press OK.
PART 2 • English