Warm-Up/Break-In Period; Operating Voltage - Classe Audio CP-800 Owner's Manual

Important!

warm-up/break-in period

operating voltage

Important!
Obey all placement considerations. Not obeying the
placement considerations may result in damage that is not
covered under the warranty.
Your new Classé preamp/processor delivers outstanding performance
immediately. However, you can expect to hear subtle improvements as it reaches
normal operating temperatures and breaks-in.
In our experience, you can expect the greatest changes within the first 72 hours.
After initial break-in, you'll enjoy consistent performance levels for years to
come.
The operating voltage of your CP-800 is 100-240 V, 50/60 Hz.
Attempting to operate your CP-800 from an incorrect AC
voltage rating may cause irreparable damage which may not
be covered by your warranty.
If you are not planning to use the preamp/processor for an extended period of
time, for example due to vacation or other travel, we suggest that you disconnect
it from AC power.
Make certain that the CP-800 is in Standby prior to disconnecting it.
Physically disconnect any and all valuable electronics from AC power during
electrical storms. A lightning strike anywhere near your home can generate a
tremendous surge on the AC mains that can jump across a simple power switch.
A surge from a lightning strike, which may be many thousands of volts, can
cause serious damage to any piece of electronics, no matter how well designed
and protected.
9