100/120 times per second. The components precisely the power required as it is needed. Fig.1 Mains Voltage and Current drawn without PFC Fig. 2 Mains Voltage and Current drawn w/ PFC (CP-800)
So making the claim that the SMPS Classé has a requirement for the highest quality audio characteristics make the switcher greater than designed for the CP-800 is our quietest power rendering. The main benefi ts of ZVS, refi ned 90% effi cient. The switching occurs at a very supply ever is not a matter of opinion.
一伀 一 伀 倀 吀 䤀䴀䄀䰀 䄀匀 夀 䌀 䠀刀 伀 一伀 唀匀 唀匀 䈀 and value of the CP-800. It is scalable and will help yield more great sounding products for Synchronous (Adaptive) USB years to come.
Page 5
FPGA, which 䐀 䄀吀 䄀 伀唀 吀 倀 唀 吀 䈀 唀 䘀 䘀 䔀 刀 is its specialty. The CP-800 employs a 300 䄀唀 䐀 䤀伀 ⬀ MHz video-grade FPGA to manage audio 䈀...
Taken as a whole, these decisions make all the difference. Fig. 6 Signal Routing (showing only 3 of 6 layers) CP-800 Motherboard Most boards in the CP-800 are six-layer circuit boards. (Fig. 6)
Specifications Frequency response 8 Hz - 200 kHz < 1 dB, Channel separation better than 100 dB stereo analog bypass Crosstalk better than -130 dB @ 1 kHz 8 Hz - 20 kHz < 0.5 dB, (any input to any output) all other sources Standby power <1 W...
Page 8
5070 François Cusson Lachine • Quèbec Canada • H8T 1B3 Tel +1.514.636.6384 Fax +1.514.636.1428 www.classeaudio.com email: cservice@classeaudio.com...
Need help?
Do you have a question about the CP-800 and is the answer not in the manual?
Questions and answers