Using A Modem Or Terminal Adapter; Using Windows Xp Service Pack 2/Windows Vista - Konica Minolta bizhub 362 User Manual

IP Scanner

Using a modem or terminal adapter

If a computer installed with a modem (or connected to a terminal adaptor) is
being used, the modem (or terminal adaptor) may dial.
If this occurs, select "Never dial a connection" or "Dial whenever a network
connection is not present" below "Dial-up and Virtual Private Network set-
tings" on the Connections tab of the Internet Properties dialog box. For de-
tails, refer to the manual for the operating system.

Using Windows XP Service Pack 2/Windows Vista

With Windows XP Service Pack 2 with Advanced Securities (SP2)/Windows
Vista, transmission performed by ImageReceiver may be affected by the en-
hanced security features (Windows firewall is activated as a standard set-
ting).
In order to use ImageReceiver, click [Unblock] in the Windows Security Alert
message. All transmissions performed by ImageReceiver are set to pass
through the Windows firewall, and all ImageReceiver functions can be used
as usual.
!
Detail
If [Keep Blocking] was clicked, all transmissions performed by ImageRe-
ceiver are blocked by the Windows firewall, and the ImageReceiver func-
tions can no longer be used. For details on allowing ImageReceiver to be
used, refer to "Allowing ImageReceiver to be used" on page 4-4.
362/350/282/250/222/200
4
4-3