Using A Dial-Up Router; Using A Modem Or Terminal Adapter; Using Windows Xp Service Pack 2/Windows Vista - Konica Minolta bizhub 362 User Manual

5

Using a dial-up router

Before using IP Scanner, correctly specify the IP address of this machine.
Caution must be taken particularly if IP Scanner is used in an environment
where a dial-up router is used.
If the IP address is incorrectly specified in an environment where a dial-up
router is used, the dial-up router may dial unnecessarily.
In addition, depending on the network settings specified on the computer,
the dial-up router may dial unnecessarily, regardless of whether the IP
address is correctly specified.

Using a modem or terminal adapter

If a computer installed with a modem (or connected to a terminal adaptor) is
being used, the modem (or terminal adaptor) may dial.
If this occurs, select "Never dial a connection" or "Dial whenever a network
connection is not present" below "Dial-up and Virtual Private Network
settings" on the Connections tab of the Internet Properties dialog box. For
details, refer to the manual for the operating system.

Using Windows XP Service Pack 2/Windows Vista

With Windows XP Service Pack 2 with Advanced Securities (SP2)/Windows
Vista, transmission performed by ImageReceiver may be affected by the
enhanced security features (Windows firewall is activated as a standard
setting).
In order to use ImageReceiver, click [Unblock] in the Windows Security Alert
message. All transmissions performed by ImageReceiver are set to pass
through the Windows firewall, and all ImageReceiver functions can be used
as usual.
5-4
IP Scanner
bizhub 362/282/222