To Program A One-Touch Dial Button - Konica Minolta bizhub 362 User Manual

2
Item
Destination
TX Size (Max.)
TX Quality (Max.)
Coding Method
Port
Reminder
If the [Utility/Counter] key was pressed to register items and specify set-
tings, be sure to press the [Reset] key in the control panel after returning
to the initial screen.

To program a one-touch dial button

1
Press the [Utility/Counter] key.
2-32
Description
Type in the IP address or host name for the recipient.
Specify the maximum document size that can be transmitted. Se-
lect "Letter/Legal" or "11×17".
Select the maximum resolution that can be sent. Select "200dpi",
"400dpi" or "600dpi".
Select the coding method for the data to be sent. Select "MH",
"MR" or "MMR". The data amount for the coding methods increase
as follows: MMR, MR, MH.
Type in the port number (between 1 and 65535).
Utility/
Counter
IP address faxing
362/350/282/250/222/200