Table of Contents
Advertisement
5
Using a dial-up router
Before using IP Scanner, correctly specify the IP address of this machine.
Caution must be taken particularly if IP Scanner is used in an environment
where a dial-up router is used.
If the IP address is incorrectly specified in an environment where a dial-up
router is used, the dial-up router may dial unnecessarily.
In addition, depending on the network settings specified on the computer,
the dial-up router may dial unnecessarily, regardless of whether the IP
address is correctly specified.
Using a modem or terminal adapter
If a computer installed with a modem (or connected to a terminal adaptor) is
being used, the modem (or terminal adaptor) may dial.
If this occurs, select "Never dial a connection" or "Dial whenever a network
connection is not present" below "Dial-up and Virtual Private Network
settings" on the Connections tab of the Internet Properties dialog box. For
details, refer to the manual for the operating system.
Using Windows XP Service Pack 2
With Windows XP SP2, transmission performed by ImageReceiver may be
affected by the enhanced security features (Windows firewall is activated as
a standard setting).
In order to use ImageReceiver, click [Unblock] in the Windows Security Alert
message. All transmissions performed by ImageReceiver are set to pass
through the Windows firewall, and all ImageReceiver functions can be used
as usual.
5-4
IP Scanner
bizhub 350/250 (Phase 2.5)
Advertisement
Table of Contents
