When Performing An Ip Relay Operation Or Forwarding Received Documents (Mode 352) - Konica Minolta bizhub 362 User Manual

Specifying management settings
Specifying whether transmission source information is added when
performing an IP relay operation or forwarding received documents
(mode 352)
Specify how transmission source information is added when performing an
IP relay operation or forwarding received documents.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected.
Bit
7
6
5
4
3, 2, 1, 0
362/350/282/250/222/200
7 6 5 4 3 2 1 0
1 1 0 1 0 0 0 0 (HEX: D0)
Description Setting
-------------------------- 1
Specifies where trans- 0
mission source infor-
1
mation is added with
IP relay operations.
Specifies whether or 0
not a transmission
1
source information is
added to received
documents that are
forwarded.
Specifies how trans- 0
mission source infor-
1
mation is added when
a received document
is forwarded.
-------------------------- 0000
Description
*Do not change this bit
when specifying settings
for this function.
Outside of the document
Inside the document
Not added
Added
Outside of the document
Inside the document
*Do not change these bits
when specifying setting for
this function.
7
Page Refer-
ence
----------
----------
----------
----------
----------
7-21