Konica Minolta bizhub 362 User Manual page 255

7
Specifies the coding method for IP relay transmissions (mode 381)
Specify the default settings for the coding method for IP relay transmissions.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected.
Bit
7, 6, 5, 4, 3
2, 1, 0
7-24
7 6 5 4 3 2 1 0
1 0 0 0 0 0 0 0 (HEX: 80)
Description Setting
-------------------------- 10000
Specifies the coding 000
method for IP relay
001
transmissions.
010
011
Others
Specifying management settings
Description
*Do not change these bits
when specifying setting for
this function.
MH
MR
MMR
JBIG
*Do not specify any set-
tings other than those
mentioned above when
specifying settings for this
function.
362/350/282/250/222/200
Page Refer-
ence
----------
----------