Konica Minolta bizhub 362 User Manual page 261

7
Bit
2, 1, 0
*1 If bit 6 is set to "1", the settings will not be applied if bit 5 is set to "1" (not
displayed). If you do not wish to display the fax number or address of the re-
cipient, bit 6 must also be set to "1" (settings can only be specified in Admin-
istrator mode).
*2 If the recipient is directly specified from the Direct Input tab, the recipient
is displayed, even if "1" (not displayed) is selected.
Specifying the deleting method for [Del.] in input screens (mode 478)
Specify the deleting method for [Del.] in input screens.
Select whether the character at cursor's position or the character to the left
of the cursor is deleted.
Settings at time of purchase
Bit
Setting (North
American
model)
Setting (Oth-
er model)
Specifying the setting
The grayed out cells are the settings at the time of purchase.
Bit
7
6, 5, 4, 3,
2, 1, 0
7-30
Description Setting
----------------------- 000
7 6 5 4 3 2 1 0
1 0 0 0 0 0 0 0 (HEX: 80)
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
Specify the deleting 0
method for [Del.] in in-
put screens.
1
---------------------- 0000000
Specifying management settings
Description
*Do not change these bits
when specifying setting
for this function.
Description
Deletes the character at
the cursor's position
Deletes the character to
the left of the cursor
*Do not change these bits
when specifying setting for
this function.
362/350/282/250/222/200
Page Refer-
ence
----------
Page Refer-
ence
p. 9-4
----------