5
Note
The following parameters have no effect, even if settings have been spec-
ified.
- "Subject Selection" on the Network tab
- "Reply Address" on the Network tab
- "File Name" on the Network tab
- "EMail Notification" on the Network tab
Specifying the transmission report printing condition
The conditions for printing the transmission result report can be specified.
The conditions for printing the transmission result report are preset with the
"Report Settings" parameters from the Administrator Management 1 screen.
Follow the procedure described below to change these conditions.
1
Touch [Menu].
–
If the optional fax kit has been installed, touch [FAX Menu].
2
Touch [TX Report] on the Setting 1 tab.
–
If the optional fax kit has been installed, touch [TX Report] on the
Set 1 tab.
SCANReady
One-Touch Search
Setting 1
TSI only
TSI
2in1
Job List
5-22
Standard
Chain
Quality&
Direct
Menu
Reduction
Input
Setting 2
Network
TX Report
2-Sided TX
Rotation TX
Memory
Free
100%
362/350/282/250/222/200
IP Relay operations