Konica Minolta bizhub 362 User Manual page 260

Specifying management settings
Note
Programmed one-touch dial buttons can be used for transmission even
if a prohibited communication mode has been specified.
If all communication modes are prohibited (modes 475 to 477), some
screens, such as those for specifying transmission settings, may not nor-
mally be displayed.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7
6
5
4
3
362/350/282/250/222/200
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
Specifies whether or 0
not the use of the
1
computer (scanner)
is prohibited.
Specifies whether 0
settings for register-
ing fax addresses or
1
printing reports can
be specified by only
the administrator or
also by the user.
Specifies whether or 0
not only recipient
1
names are displayed
(and the fax number
or address is not
displayed) in reports
and Job List screens
and when a one-
touch dial button is
* *
touched. 1, 2
----------------------- 0
Specifies whether or 0
not the use of TCP-
1
Socket is prohibited.
Description
Permitted
Prohibited
Settings can also be
specified by users.
Settings can only be
specified in Administrator
mode.
Displayed
Not displayed
*Do not change this bit
when specifying setting
for this function.
Permitted
Prohibited
7
Page Refer-
ence
----------
----------
----------
----------
----------
7-29