Specifying The Transmission Report Printing Condition - Konica Minolta bizhub 362 User Manual

Scan to PC operations
Note
The following parameters and functions have no effect, even if settings
have been specified.
- "TSI" on the Setting 1 tab
- "Rotation TX" on the Setting 1 tab
- "Subject Selection" on the Network tab
- "Reply Address" on the Network tab
- "Email Notification" on the Network tab

Specifying the transmission report printing condition

The conditions for printing the transmission result report can be specified.
The conditions for printing the transmission result report are preset with the
"Report Settings" parameters from the Administrator Management 1 screen.
Follow the procedure described below to change these conditions.
1
Touch [Menu].
– If the optional fax kit has been installed, touch [FAX Menu].
2
Touch [TX Report] on the Setting 1 tab.
– If the optional fax kit has been installed, touch [TX Report] on the
Set 1 tab.
SCANReady
One-Touch Search
Setting 1
TSI only
TSI
2in1
Job List
362/350/282/250/222/200
Standard
Chain
Direct Quality&
Menu
Reduction
Input
Setting 2 Network
TX Report
2-Sided TX Rotation TX
Memory
Free
100%
3
3-21