Specifying management settings
Specifying settings concerning the transmission results for IP relay
transmissions (mode 382)
Specify the length of time until the transmission results for an IP relay trans-
mission times out and the operation that is performed when a timeout oc-
curs.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected.
Bit
7
6, 5, 4, 3
2, 1, 0
362/350/282/250/222/200
7 6 5 4 3 2 1 0
0 1 0 0 0 0 0 0 (HEX: 40)
Description
Setting
Specifies the opera-
0
tion that is performed
1
when the return of
transmission results
for an IP relay trans-
mission times out.
Specifies the length of
0000
time until transmission
0001
results for an IP relay
transmission times
0010
*
out.
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
--------------------------
000
Description
Transmission error
Normal transmission
0 minutes
5 minutes
10 minutes
15 minutes
20 minutes
30 minutes
40 minutes
50 minutes
1 hour
2 hours
3 hours
4 hours
5 hours
6 hours
7 hours
8 hours
*Do not change these bits
when specifying setting for
this function.
7
Page Refer-
ence
----------
----------
----------
7-25