Konica Minolta bizhub 362 User Manual page 249

7
Bit
4
3, 2, 1, 0
Compared item and the setting for the number of digits compared in the CSI
signal
Example: When the number of digits to be compared in the CSI signal is set
to 6 and a 10-digit CSI signal is received
Compared
item
Recipient's
telephone
number
7-18
Description Setting
Specifies whether or 0
not the machine per-
forms a checked re-
ceiver transmission
1
if the called number
does not contain
special characters
for a checked re-
ceiver transmission.
Specifies the 0000
number of digits of
0001
the CSI signal that
are compared when
0010
performing a
checked receiver
0011
transmission.
(If the called number 0100
does not fulfill the
0101
number of digits
specified here, a
0110
comparison is made
with all digits of the
0111
called number. If a
comparison is made 1000
with a comparison
1001
number using spe-
cial characters, the
1010
comparison is made
with all digits of the
1011-1111
comparison
number, regardless
of the number of
digits specified with
this setting.)
Comparison relationship
When the recipient's telephone number
has more digits than the number of dig-
its to be compared from the CSI signal
When the recipient's telephone number
has less digits than the number of digits
to be compared from the CSI signal
Specifying management settings
Description
Does not perform a
checked receiver trans-
mission
Performs a checked re-
ceiver transmission
Cancel
1 digit
2 digits
3 digits
4 digits
5 digits
6 digits
7 digits
8 digits
9digits
10 digits
*Do not specify this set-
ting for this function.
Operation
The comparison is performed accord-
ing to the setting for the number of
digits compared in the CSI signal.
(With a 10-digit called number, digit 6
from the end is compared.)
The comparison is performed only
with the number of digits in the called
number.
(With a 4-digit called number, digit 4
from the end is compared.)
362/350/282/250/222/200
Page Refer-
ence
----------
----------