Konica Minolta bizhub 362 User Manual page 144

IP Scanner
No. Command
3 "Settings for saved imag-
es"–"Image Folder Set-
ting"
4 "Settings for saved imag-
es"–"Sort Settings"
5 "Settings for saved imag-
es"–"Divided Settings"
6 "Notify Settings"–"Re-
ceive Notify Settings"
7 "Notify Settings"-"Error
Notify Settings"
362/350/282/250/222/200
Description
Click this command to change the folder where the image
data is saved. This command is available only if there is a
check mark beside "Save received images".
A removable drive, CD-ROM drive or network drive cannot
be specified as the destination folder.
Select this command to specify settings for sorting
scanned documents. This command is available only if
there is a check mark beside "Save received images". For
details, refer to "Sort Settings dialog box (Scanner tab)" on
page 4-19.
Select this command to specify settings for dividing
scanned documents. This command is available only if
there is a check beside "Save received images". For de-
tails, refer to "Divided Settings dialog box" on page 4-22.
Select this command to specify settings for computer noti-
fication for transmitting scanned documents. This com-
mand is available only if there is a check beside "Save
received images". For details, refer to "Receive Notify Set-
tings dialog box" on page 4-23.
Select this command to display the Error Notify Settings di-
alog box.
To send error notifications to another computer, select the
"Error notify to other PC" check box, type in the IP address
of the computer that will receive the notification, and then
click [OK].
To specify a port number, select the "Specify Port" check
box, and then specify the port number.
Specify the number of the SMTP port used by ImageRe-
ceiver on the computer to receive the notification (normally
"25").
Click [Test]. A test notification is sent to the specified recip-
ient.
4
4-29