Additional Commands - ADTRAN Express L128T S User Manual

ADDITIONAL COMMANDS

Other commands available from the terminal mode are given below:
Command
save
mac
version
reset
exit
download
DOWNLOAD/UPLOADING
CONFIGURATION
The Express L128T S/T's configuration can be captured to a text file
using the download command. The text file can be edited if required.
Upload of the configuration can be accomplished by sending the text
file to the Express L128T S/T in terminal mode. A baud rate of 9600 is
strongly recommended when uploading. As soon as the upload has
been completed, type "save" to save the new configuration to flash. A
"reset" command or power cycle 10 seconds after the save command
is recommended to ensure that the new configuration is complete.
61202070L3-20
Description
Saves the configuration to non-volatile RAM
(flash).
Returns the MAC address for the Express L128T
S/T.
Returns the firmware version and routing stack
version.
Resets the unit.
Leaves terminal mode and returns to menus.
Downloads complete configuration to the
terminal screen for capture.
Express L128T S/T User Manual
Appendix E. Terminal Mode Commands
E-3