Table of Contents
Advertisement
Chapter 3. Terminal Menu Operation
Bandwidth/Mode
Write security: 3; Read security: 5
When this option is set to On, the Express L128T S/T will apply
its bandwidth-on-demand features for this Connection List pro-
file. If set to Off, none are performed.
Bandwidth/Idle Timeout
Write security: 3; Read security: 5
This is the number of seconds the ISDN line must be idle before
hanging up this connection. A value of 0 (def) means the
Express L128T S/T will never drop the link based on the idle
timer. The range is 0 to 255.
Bandwidth/Preempt Time
Write security: 3; Read security: 5
Occasionally an application will require to connect to a different
location before the current connection's idle timer has timed out.
This causes the application to have to wait for idle timer before it
can use the B-channel. This preempt time allows the Connection
List that is active to be dropped sooner than the normal idle
time. The value ranges from 0 to 255 and is in seconds. When
bandwidth is needed for another application, the idle timer is
compared to this preempt time. If the idle timer is greater, the
connection is preempted. If set to 255 (def), the connection is
never preempted. If set to 0, the connection is disconnected
immediately when another application is requested.
Bandwidth/Upper Threshold
Write security: 3; Read security: 5
This is the percentage of bandwidth that must be at least present
on one B-channel before a second B-channel is added. The range
is 0 to 100 and is in percentages. The default is 80 percent, which
is equivalent to 51.2 kbps. See the section Bandwidth/Samples
(below) for more information on how the bandwidth rate is cal-
culated.
61202070L3-20
Express L128T S/T User Manual
3-53
Advertisement
Table of Contents
Troubleshooting
