Connection List/Dial Out; Dial Out/Number 1; Dial Out/Number 2; Dial Out/Call Type - ADTRAN Express L128T S User Manual

Connection List/Dial Out

The dialing parameters for establishing this connection are defined
under this menu.

Dial Out/Number 1

Write security: 3; Read security: 5
This is the first number used for dialing up this connection.

Dial Out/Number 2

Write security: 3; Read security: 5
This is the second number used for dialing a second B-channel when
adding bandwidth. If BACP/BAP is negotiated, this number is not
necessary. If this number is not specified and BACP/BAP is not used,
the Number 1 number is re-dialed when adding bandwidth.

Dial Out/Call Type

Write security: 3; Read security: 5
The call type can be configured in four different ways:
Speech
Audio
64K (def)
61202070L3-20
Speech directs the call control software to request a Mu-
law encoded speech circuit as the bearer capability for
the outgoing calls. The speech option is used with an
ISDN line configured for voice service. In some areas,
voice service costs less than data services. A speech
call type does not always guarantee an end-to-end
digital connection with some local and long distance
carriers.
Audio directs the call control software to request a 3.1
kHz audio circuit as the bearer capability for the
outgoing calls. The audio option is used with an ISDN
line configured for voice service. In some areas, audio
service costs less than data services. An audio call type
does guarantee a digital end-to-end digital connection.
The default call type for ISDN service is Data 64 kbps.
This directs the call control software to request an
unrestricted 64 kbps circuit.
Express L128T S/T User Manual
Chapter 3. Terminal Menu Operation
3-51