Table of Contents
Advertisement
Additional Commands
Other commands available from the terminal mode are given below:
save
Saves the configuration to non-volatile RAM (flash).
mac
Returns the MAC address for the Express L768/L1.5.
version
Returns the firmware version and routing stack version.
reset
Resets the unit.
exit
Leaves terminal mode and returns to menus.
download
Downloads complete configuration to the terminal screen for
capture.
Download/Uploading Configuration
The Express L768/L1.5's configuration can be captured to a text file using the
download command. The text file can be edited if required. Upload of the
configuration can be accomplished by sending the text file to the Express
L768/L1.5 in terminal mode. A baud rate of 9600 is strongly recommended
when uploading. As soon as the upload has been completed, type "save" to
save the new configuration to flash. A "reset" command or power cycle 10 sec-
onds after the save command is recommended to ensure that the new config-
uration is complete.
61202192L1-1
Appendix E: Terminal Mode Commands
Express L768/L1.5 User Manual
107
Advertisement
Table of Contents
