Additional Commands - ADTRAN Express 6100 Manual

ADDITIONAL COMMANDS

Other commands available from the terminal mode are listed below:
Saves the configuration to non-volatile RAM (flash).
save
Returns the MAC address for the Express 6100/
mac
6120.
Returns the firmware version and routing stack
version
version.
Resets the unit.
reset
Leaves terminal mode and returns to menus.
exit
Downloads complete configuration to the terminal
download
screen for capture.
DOWNLOAD/UPLOADING
CONFIGURATION
The Express 6100/6120's configuration can be captured to a text file
using the download command. The text file can be edited if required.
Upload of the configuration can be accomplished by sending the text
file to the Express 6100/6120 in terminal mode. A baud rate of 9600 is
strongly recommended when uploading. As soon as the upload has
been completed, type
save
command or power cycle 10 seconds after the save command is
reset
recommended to ensure that the new configuration is complete.
61200176L1-1 Express 6100/6120 User Manual
Appendix E. Terminal Mode Commands
to save the new configuration to flash. A
E-3