Chapter 3. Terminal Menu Operation
Bandwidth/Lower Threshold
Write security: 3; Read security: 5
This is the percentage of maximum bandwidth the bit rate must
go below on two B-channels before one is dropped. The range is
0 to 100 and is in percentages. The default is 30%, which is
equivalent to 38.4 kbps. See the section Bandwidth/Samples
(below) for more information on how the bandwidth rate is cal-
culated.
Bandwidth/Min Channels
Write security: 3; Read security: 5
This represents the minimum number of B-channels that must
be up for this Connection List profile. This value ranges from 0
to 2. The default is 0.
Bandwidth/Max Channels
Write security: 3; Read security: 5
This represents the maximum number of B-channels this Con-
nection List profile can have. The allowed values are 1 and 2.
The default is 2. A value of 1 means that no extra bandwidth can
be obtained for this connection.
Bandwidth/Samples
The parameters under this menu control the rate at which the Express
L128T S/T samples the bandwidth on the B-channel(s).
Samples/Sample Rate
Write security: 3; Read security: 5
This is the time between samples used for calculating data rates
on the ISDN call. The value is in seconds and ranges from 1 to
255. The default is 5 seconds.
Samples/Samples
Write security: 3; Read security: 5
This is the number of WAN data rate samples taken before a
decision to change bandwidth is performed. The range is 1 (def)
to 255 samples.
3-54
Express L128T S/T User Manual
61202070L3-20