Additional Commands; Download/Uploading Configuration - ADTRAN Express L128 User Manual

Additional Commands

Other commands available from the terminal mode are given below:
save Saves the configuration to non-volatile RAM (flash).
mac Returns the MAC address for the Express L128/L128T.
version Returns the firmware version and routing stack version.
reset Resets the unit.
exit Leaves terminal mode and returns to menus.
download Downloads complete configuration to the terminal screen for
capture.

Download/Uploading Configuration

The Express L128/L128T's configuration can be captured to a text file using
the download command. The text file can be edited if required. Upload of the
configuration can be accomplished by sending the text file to the Express
L128/L128T in terminal mode. A baud rate of 9600 is strongly recommended
when uploading. As soon as the upload has been completed, type "save" to
save the new configuration to flash. A "reset" command or power cycle 10 sec-
onds after the save command is recommended to ensure that the new config-
uration is complete.
61202.070L1-1
Appendix E: Terminal Mode Commands
Express L128/L128T User Manual 147