Call Sessions/Session1 And Call Sessions/Session2 - ADTRAN Express L128T S User Manual

Call Sessions/Session1 and Call Sessions/Session2

Read security: 5
The Express L128T S/T can support up to two active connections at
one time. These two menus reflect the results of PPP negotiations,
user name, time connected, idle timer, and data rates for the session.
PPP Links
BCP
IPCP
IPXCP
CCP
BACP
User
Number(s)
Connect Time
Up Time
Idle Timer
Tx Pkts
Rx Pkts
Tx Bytes
Rx Bytes
Tx Rate
Rx Rate
Tx Link Rate
Rx Link Rate
Tx Comp Ratio
Rx Comp Ratio
61202070L3-20
Reflects LCP layers active
Shows UP if PPP Bridge Control Protocol has
negotiated successfully
Shows UP if PPP IP Control Protocol has negotiated
successfully
Shows UP if PPP IPX Control Protocol has negotiated
successfully
Shows UP if PPP Compression Control Protocol has
negotiated successfully
Shows UP if PPP Bandwidth Allocation Control
Protocol has negotiated successfully
Displays the user name of the PPP peer
Shows the phone number dialed if outgoing call or
caller ID if incoming call
Shows the date and time when the call last
connected
Displays how long the call has been connected
Current value of the idle timer (number of seconds
since filtered packet was passed through)
Number of packets transmitted toward the WAN
direction
Number of packets received from the WAN direction
Number of bytes transmitted toward the WAN direction
Number of bytes received from the WAN direction
Current application data transmission rate toward the
WAN
Current application data reception rate from the WAN
Current actual data transmission rate on the WAN in
bytes/sec
Current actual data reception rate on the WAN in
bytes/sec
Current transmission compression ratio
Current reception compression ratio
Express L128T S/T User Manual
Chapter 3. Terminal Menu Operation
3-67