Chapter 3. Terminal Menu Operation
IP/Default Gateway
Write security: 3; Read security: 5
The default gateway is used by the Express L128T S/T for sending IP
packets whose destination address is not found in the route table. If
this address is all zeros, then the first WAN connection becomes the
default gateway. If the address entered is not on the Ethernet seg-
ment, then an "idle route" entry is added to the route table.
IP/Static Routes
Static Routes can be inserted under this menu.
Static Routes/Active
Write security: 4; Read security: 5
Adds this static route entry to the IP routing table when set to Yes (def)
and removes it (if it was previously added) if set to No.
Static Routes/IP Address
Write security: 4; Read security: 5
This is the IP address of the host or network address of the network.
Static Routes/Subnet Mask
Write security: 4; Read security: 5
This mask determines the bits in the previous IP address that are used.
If this is to be a host route, it must be set to all ones (255.255.255.255).
Static Routes/Gateway
Write security: 4; Read security: 5
This is the IP address of the router to receive the forwarded IP packet.
3-14
Express L128T S/T User Manual
61202070L3-20