Static Routes/Hops; Static Routes/Private; Ip/Ip Router; Ip Router/Mode - ADTRAN Express L128T S User Manual

Static Routes/Hops

Write security: 4; Read security: 5
This is the number of router hops required to get to the network or
host. Maximum distance is 15 hops.

Static Routes/Private

Write security: 4; Read security: 5
When set to No, the Express L128T S/T will advertise this static route
using RIP. Otherwise, setting to Yes means that the route is kept pri-
vate.

IP/IP Router

The IP router is configured under this menu as follows.

IP Router/Mode

Write security: 3; Read security: 5
When this option is set to On (def), the Express L128T S/T will adver-
tise and listen to routes from other IP routers. If Off, the route table is
still used but only static routes are used for routing IP packets and
only the Ethernet port is used. IP packets can be sent over the WAN,
but only when bridged.

IP/RIP

Write security: 3; Read security: 5
The Routing Information Protocol (RIP) is supported by the Express
L128T S/T. The following parameters are required for setting up the
mode on the Ethernet port:

RIP/Mode

Write security: 3; Read security: 5
This option turns RIP On (def) or Off.
61202070L3-20 Express L128T S/T User Manual
Chapter 3. Terminal Menu Operation
3-15