Configuration/Management; Management/Telnet; Telnet/Server Access; Figure 3-9. Configuration/Management Screen - ADTRAN Express L128T S User Manual

Chapter 3. Terminal Menu Operation

Configuration/Management

The Express L128T S/T can be managed using Telnet, Simple Net-
work Management Protocol (SNMP), or the maintenance port. SNMP
support is limited to MIB definitions. See SNMP on page C-1 for a de-
scription of the MIBs supported by the Express L128T S/T. Each of the
three methods can be protected using authentication. Figure 3-9
shows the Configuration/Management menu.

Figure 3-9. Configuration/Management Screen

Management/Telnet

Any telnet client application can bring up a session to the Express
L128T S/T's Telnet server using the standard telnet TCP port. Only
one session is supported at a time. All sessions require a user name
and password.

Telnet/Server Access

Write security: 2; Read security: 5
This option must be set to On (def) to access the Express L128T S/T
via Telnet. Turning it Off means that access is denied.
61202070L3-20 Express L128T S/T User Manual 3-59