Table of Contents
Advertisement
Additional Commands
Other commands available from the terminal mode are given be-
low:
Command
save
mac
version
reset
exit
download
Download/Uploading Configuration
The Router Option Module's configuration can be captured to a
text file using the download command. The text file can be edited
if required.
Uploading the configuration can be accomplished by sending the
text file to the Router Option Module in terminal mode. A baud
rate of 9600 is strongly recommended when uploading. As soon as
the upload has been completed, type Save to save the new config-
uration to flash.
A reset command or power up cycle 10 seconds after the save
command is recommended to ensure that the new configuration
is complete.
61203.153L2-1
Appendix E: Terminal Mode Commands
Description
Saves the configuration to non-volatile RAM
(flash).
Returns the MAC address for the Router Option
Module.
Returns the firmware version and routing stack
version.
Resets the unit.
Leaves terminal mode and returns to menus.
Downloads complete configuration to the termi-
nal screen for capture.
Router Option Module User Guide
E-3
Advertisement
Table of Contents
