ADDITIONAL COMMANDS
Other commands available from the terminal mode are listed below:
save
mac
version
reset
exit
download
DOWNLOAD/UPLOADING
CONFIGURATION
The Express L128FP's configuration can be captured to a text file using
the download command. The text file can be edited if required. Up-
load of the configuration can be accomplished by sending the text file
to the Express L128FP in terminal mode. A baud rate of 9600 is strong-
ly recommended when uploading. As soon as the upload has been
completed, type
command or power cycle 10 seconds after the save command is rec-
ommended to ensure that the new configuration is complete.
61202070L4-20
Saves the configuration to non-volatile RAM (flash).
Returns the MAC address for the Express L128FP.
Returns the firmware version and routing stack
version.
Resets the unit.
Leaves terminal mode and returns to menus.
Downloads complete configuration to the terminal
screen for capture.
to save the new configuration to flash. A
save
Express L128FP User Manual
Appendix E. Terminal Mode Commands
reset
E-3