RIP/Triggered
Write security: 3; Read security: 5
When set to Yes, only IP RIP updates are sent when the routing
table has changed and learned routes are not "aged." When set
to No (def), updates are sent periodically.
RIP/Retain
Write security: 3; Read security: 5
When this Connection List entry is disconnected and this param-
eter is set to Yes, all routes learned from this WAN connection
are retained and their routing interface is set to idle. This per-
mits dial-on-demand to occur using this profile for any IP net-
work that might have been advertised by the particular PPP
peer. The idle routes can be flushed or "zombied" from the rout-
ing table if a manual hangup is performed when this WAN con-
nection is not active. See Dial/Hang Up on page 3-65. When this
Connection List entry is disconnected and this parameter is set
to No (def), routes learned from this session are "zombied" and
are not retained.
Connection List/IPX
The IPX menu contains the parameters for exchanging IPX data with
the PPP peer.
IPX/Mode
Write security: 3; Read security: 5
Setting to On (def) will permit this connection profile to negotiate PPP
IPXCP with the PPP peer for exchanging of IPX packets.
IPX/Remote Network
Write security: 3; Read security: 5
A non-zero value in this remote network number will allow the Ex-
press L128T S/T to add a route to the PPP peer's network to the rout-
ing table.
61202070L3-20
Express L128T S/T User Manual
Chapter 3. Terminal Menu Operation
3-45