Removing And Replacing A Magazine Using The Ocp - Fujitsu P3AM-5382-03ENZ0 Installing, Starting Up And Maintaining

Chapter 3 Operating the LTO Library
3.3 Magazines
3.3.2

Removing and Replacing a Magazine Using the OCP

CAUTION
This OCP option lets you gain access to the left and right magazine. Access to the magazines may require the
use of a password.
To remove a magazine:
Procedure
1
From the Home Screen, press
2
Enter
Press
3
Up
Press
Right Magazine.
4
Enter
Press
5
Enter a password if requested.
6
The display will read Left Magazine Unlocked or Right Magazine Unlocked.
7
Pull the released magazine out of the library.
8
The screen will now display Insert Left Magazine or Insert Right Magazine.
The library cannot perform any other operation until the magazine is replaced. After
exchanging tapes in a magazine, slide the magazine completely into the library. The
magazine will lock into place once it is correctly installed and the library will inventory the
magazine.
FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining
The magazine must only be removed manually in an emergency. Failure to follow
normal procedure can cause data loss and equipment damage.
Up
or
to select.
Down
or until the screen displays either Unlock Left Magazine or Unlock
to select the desired magazine to unlock.
Copyright 2014 FUJITSU LIMITED
Down
on the OCP until the screen displays
41
Operations
.
End of procedure
P3AM-5382-03ENZ0