Chapter 3 Operating the LTO Library
3.4 Remote Management Unit (RMU)
Figure 3.19 Status, Inventory page expanded
3.4.6
Configuration
3.4.6.1
Changing the System Configuration
As changes are made, they will only be applied after the "Apply Selections" (or "Submit") button down right is
selected. To make the changes visible, you have to click the "Refresh" button. After making the selection, a
warning page will inform the user of the impact of their proposed change. In some cases a popup screen will
ask the operator to confirm their change. Many changes will also require a reboot. You can reach this page by
Configuration → System
selecting
Changes that can be made are:
•
Library Master Drive
•
Library Mode
Random
-
Sequential
-
Automatic
-
Auto load
-
-
Loop
•
Active Slots
•
Mailslot Enabled
•
Auto Clean Enabled
Barcode Label Length Reported To Host
•
Barcode Label Alignment Reported To Host
•
Select Language
•
Change ID String
•
FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining
.
51
Copyright 2014 FUJITSU LIMITED
P3AM-5382-03ENZ0