Chapter 3 Operating the LTO Library
3.4 Remote Management Unit (RMU)
Figure 3.22 Configuration, Drive page (FC)
3.4.6.3
Changing the Network Configuration
This page shows the current network configuration of the library and allows modification to the configuration.
When a change is requested, a pop-up box will ask to confirm the changes. You can reach this page by
Configuration → Network
selecting
A list of changes that can be made are:
Host Name
•
•
Domain Name
•
IPv4 DHCP Address (check On or unchecked)
•
IPv4 Static Address
•
IPv4 Subnet Mask
IPv4 Gateway Address
•
IPv4/IPv6 DNS Server 1/2
•
IPv6 Stateless Auto Config
•
IPv6 DHCPv6 Addressing
•
IPv6 Static Addressing
•
•
IPv6 Static Address
•
Enable SSL for Web
FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining
.
53
Copyright 2014 FUJITSU LIMITED
P3AM-5382-03ENZ0