Figure 3.33 Configuration, User Page - Fujitsu P3AM-5382-03ENZ0 Installing, Starting Up And Maintaining

Chapter 3 Operating the LTO Library
3.4 Remote Management Unit (RMU)
Support Name
•
The name of the individual within your company to contact for RMU or library support
Support Phone
•
The phone number of the individual within your company to contact for RMU or library support
Support Email
•
The email address of the individual within your company to contact for RMU or library support

Figure 3.33 Configuration, User page

3.4.6.6 Setting Date/Time
This page allows the user to set the time and date, and how it will be displayed. You can reach this page by
Configuration → Date/Time
selecting
• Time (24H)
Enter the current time. Using the 24 - hour format, 1:00 pm would be 13:00:00 (HH:MM:SS).
• Date
Enter the current date.
Clock Synchronization Configuration
• Enable Clock Synchronization
Click to enable or disable the SNTP server. Click
• SNTP Server Address
Most NTP (Network Time Protocol) servers also support SNTP (Simplified NTP). Click
information.
• UTC Time Zone Offset
This shows current time zone selected. Select the zone for your location from the pull down list.
• Enable Daylight Savings Adjustment
Enabling Daylight Savings will advance the local time by one hour. Click
FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining
.
Help
for further information.
59
Copyright 2014 FUJITSU LIMITED
Help
for further
Help
for further information.
P3AM-5382-03ENZ0