Rear Panel; Figure 1.3 Rear Panel With A Sas Tape Drive; Figure 1.4 Rear Panel With A Fibre Channel Tape Drive - Fujitsu P3AM-5382-03ENZ0 Installing, Starting Up And Maintaining

Chapter 1 Product Description

1.2 Rear Panel

1.2 Rear Panel
The rear of the tape library provides access to signal connectors, tape drive bay, the power connector,
Ethernet, serial and the USB port.
LTO drive each.

Figure 1.3 Rear panel with a SAS tape drive

Figure 1.4 Rear panel with a Fibre Channel tape drive

No.
Power connector
1
The library requires a 110/220 volt AC power connection
2 Shipping lock (storage location)
3 Fan vent
4 Tape drive sled
6 Product label foil (see
7 Tape Drive LED
8 Ethernet port
9 Serial port
10 Controller LED
11 USB port (Host)
12 SAS connector
13 Fibre Channel connector
FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining
Figure 1.3 to Figure 1.4
Description
"Chapter 6 Packaging before Transportation" (page
15
Copyright 2014 FUJITSU LIMITED
show the rear panel of a library with a half height
85))
P3AM-5382-03ENZ0