Removing And Mounting The Door - Fujitsu PRIMERGY S40-DF Manual

Converting the PRIMERGY S40-DF PRIMERGY S40-DF capacity extension
1.4.1

Removing and mounting the door

I
Since the same method applies to both the floorstand and stackable
models, only the floorstand model is shown in the following figure.
Figure 2: Removing the door (floorstand model)
Ê Unlock the door with the key (1) and open it (2).
Ê Remove the door by lifting it up (3) and out.
Mounting is performed in the reverse order.
8
U41100-J-Z156-1-74